QVINTETT 90CM

QVINTETT 90cm

QVINTETT 90cm - an active hospital bed

QVINTETT is a Swedish-made quality bed, tried and tested over many years, which provides a safe and reliable solution. The bed is tested and approvedaccording to IEC 60601-2-52.

QVINTETT care bed is electrically adjustable in height with a large work area,and continuously adjustable in the back, legs - and foot section. The bed is also equipped with plane mode feature is programmable. All settings are done withthe bed's control box that is developed in collaboration with visually impaired association for the best usability.

QVINTETT care bed has an active back with a unique pattern of movement that allows the backrest backwards and upwards even when raising to minimize alleviates skin blisters.

Function

ADJUSTMENT

The QVINTETT bed offers many functions that are easily controlled from the bed's handheld control. Take particular note that the bed's foot section goes under the bed level in the sitting position.

The height of the bed is adjustable electrically. It can be easily separated between the sprung base and bed lift, without using tools. Apart from the horizontal position, the sprung base can be adjusted, continuously and independently, using the electric motor as described below. All adjustments are made with the bed's control unit.

ACTIVE BACKREST

The bed's backrest is active, which means the backrest, when rising, lifts up/backwards and in this way alleviates skin blisters.

SURFACE TREATMENT
The bed's metal parts are powder coated.

LYING SURFACE
The bed's lying surface consists of glued laminated, sprung wood ribs (6 ply) with foil surface. The wood ribs are suspended in flexible rubber sleeves, manufactured from an age resistant rubber compound.

CLEANING
All surfaces can be cleaned with readily available cleansers and disinfectants.

ELECTRONICS AND MOTORS
Comfort Qvintett is driven by a low voltage system, 24 V. Low voltage motors with inbuilt limit sensors for gentle start and stop, protection class IP X6.

The electronics unit contains an inbuilt transformer, 220V/24V, as well as electronic protection against overloading, protection class IPX6. The backrest motor only applies pushing pressure, to eliminate the risk of being trapped under the backrest.

NOISE
Max noise = 47 dB.

STANDARD
CE marked according to bed standard IEC 60601-2-52.

DIMENSIONS
Bed frame Safir 3-60
Total external size, length, cm 214 cm
Total external size, width, cm 102 cm
Total internal size, length, cm 206 cm
   
Sprung base QVINTETT
Divided into 4 parts
Backrest 77 cm
Seat section 20 cm
Leg section 37 cm
Foot section 56 cm
Max mattress size 90x200
Rec mattress size 85x200
Can be lengthened in steps of 5 cm to max internal size 221 cm
   
NOTE! For extensions over 210 cm, a special sprung base extender is required.
 
WEIGHT
Sprung base QVINTETT
Sprung base (excl. thigh/foot section) 46 kg
Leg/foot section (removable) 9 kg
Total weight 55 kg

 

CHARACTERISTICS BED LIFT Type B Type C Type E
Wheel lock C lock C lock I lock
Wheel diameter, standard 100 mm 100 mm 125 mm
Alternative wheel diameter 50, 80 mm 50, 80 mm 50, 80, 100 mm
Lowest height * ca 29-34 cm ca 29-34 cm ca 25-33 cm
Highest height * ca 79-84 cm ca 77-82 cm ca 75-83 cm
Clearance ca 11-16 cm ca 11-16 cm ca 7-15 cm
Weight 43 kg 49 kg 40 kg
SWL (Safety working load) 200 kg 235 kg 200 kg
User weight 165 kg 200 kg 165 kg
 
*) Size given excl. mattress.