QVINTETT 90CM HANDLING
QVINTETT 90cm handling - the bed that can be dismantled
QVINTETT HANDLING is designed to ease the handling, assembly and transport of the bed. The bed mechanics can be easily dismantled into four (five) parts without using tools, which eases delivery and assembly in cramped spaces. However, it is not necessary to dismantle the bed for transport – the bed can be moved just as easily on a so-called bed transport trolley.
The bed is tested and conforms to IEC 60601-2-52.
DISMANTLING / ASSEMBLY
QVINTETT HANDLING offers many options for dismantling and transport. Dismantling is performed without tools.
The QVINTETT bed offers many functions that are easily controlled from the bed's handheld control unit. Take particular note that the bed's foot section goes under the bed level in the sitting position.
The height of the bed is adjustable electrically. It can be easily separated between the sprung base and bed lift, without using tools. Apart from the horizontal position, the sprung base can be adjusted, continuously and independently, using the electric motor as described below. All adjustments are made with the bed's control unit.
The bed's backrest is active, which means the backrest, when rising, lifts up/backwards and in this way alleviates skin blisters.
The bed's metal parts are powder coated.
The bed's lying surface consists of glued laminated, sprung wood ribs (6 ply) with foil surface. The wood ribs are suspended in flexible rubber sleeves, manufactured from an age resistant rubber compound.
All surfaces can be cleaned with readily available cleansers and disinfectants.
ELECTRONICS AND MOTORS
Comfort Qvintett is driven by a low voltage system, 24 V. Low voltage motors with inbuilt limit sensors for gentle start and stop, protection class IP X6.
The electronics unit contains an inbuilt transformer, 220V/24V, as well as electronic protection against overloading, protection class IPX6. The backrest motor only applies pushing pressure, to eliminate the risk of being trapped under the backrest.
Max noise = 47 dB.
CE marked according to bed standard IEC 60601-2-52 .
|CHARACTERISTICS BED LIFT||Type B||Type C||Type E|
|Wheel lock||C lock||C lock||I lock|
|Wheel diameter, standard||100 mm||100 mm||125 mm|
|Alternative wheel diameter||50, 80 mm||50, 80 mm||50, 80, 100 mm|
|Lowest height *||ca 29-34 cm||ca 29-34 cm||ca 25-33 cm|
|Highest height *||ca 79-84 cm||ca 77-82 cm||ca 75-83 cm|
|Clearance||ca 11-16 cm||ca 11-16 cm||ca 7-15 cm|
|Weight||43 kg||49 kg||40 kg|
|SWL (Safety working load)||200 kg||235 kg||200 kg|
|User weight||165 kg||200 kg||165 kg|
|*) Size given excl. mattress.|